Name: Viking K-1775-3-EWP Stainless Steel Handsfree Video Entry Phone with Built-In Keypad and Proximity Card Reader
SKU: K-1775-3-EWP
Price: 1125.7 USD
Availability: InStock

Skip to the end of the images gallery

Skip to the beginning of the images gallery

$1,125.70

Availability: Usually ships in 5 days

SKU

K-1775-3-EWP

Details

The Viking K-1775-3 Series video entry phones provide a durable and attractive hands-free phone for apartment and residential door entry or applications requiring a vandal resistant speaker phone with integrated color video camera and 125 KHz Proximity Card Reader.

Viking K-1775-3 Features:

Apartment entry phone when used with the K-1900-3 Apartment Entry Dialer or C-4000 Apartment/Office Entry Controller or C-3000 Apartment Entry Controller
Use with a Viking C-500 to control 1 or 2 (expandable to 8) K-1700’s and door/gate control on a single phone line
Use with a Viking C-2000B to control 1 to 4 K-1775’s and door/gate control on a single phone line
Courtesy and customer assistance phone
Automated teller (ATM) phone
Security or emergency phone
Hot-Line phone when used with the K-1900-5 Hot-Line Dialer
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Kiosk phone with (100 number speed dialing) when used with the K-1900-9 Multi-Number Dialer
Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments, and wide operating temperature of -30° F to 150° F
Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, stainless steel “Call” button, heavy duty metal keypad and T-10 Torx Security mounting Screws, scratch resistant powder coating (K-1775-3-BN)
Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch. Switch internally sealed per IP67
Mylar speaker, Self-draining mic mount, Faceplate, mic and speaker gaskets, Weather Resistant powder paint (K-1775-3-BN)
K-1775-3-EWP is designed to meet IP66 Ingress Protection Rating
Available in 2 standard faceplate finishes: 316 brushed stainless steel or oil rubbed bronze
Blue “in use” LED
Telephone line powered
Volume adjustments for microphone and speaker
Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder tone, maximum call time out and 40 second silence time out
Selectable auto-answer feature for monitoring
Selectable push button disconnect
Volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Zinc plated steel rough-in box with (2) 3/4” conduit knockouts
Optional VE-6X7 Surface Mount Box available
Selectable VOX switching speed

Specifications:

Power: Telephone line powered 20V DC/20mA minimum
Dimensions: Overall: 140mm x 165mm x 66mm (5.5” x 6.5” x 2.6”) , Rough-in box: 114mm x 140mm x 64mm (4.5” x 5.5” x 2.5”)
Environmental: -29°C to 54°C (-20°F to 130°F)
Humidity - K-1770-3: 5% to 95% non-condensing
Humidity - K-1770-3-EWP: Up to 100% condensing
Speaker Volume: Approximately 70 db maximum @1m
Connections: Gel-filled tip and ring connectors
CPC Disconnect Time: 500ms minimum
REN #: 0.5 A

Camera Specifications:

Power: 6-22V DC 150mA (12V DC UL Listed adapter included)
Image Sensor: 1/4” color CMOS • Video Output: 1 VP-P composite, NTSC, 75 ohms
Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels)
Sensitivity: 0.025 LUX (50 IRE) F 1.2 3200K
Lens: 2.1mm, conical pinhole
FOV(Field of View): 80° Horizontal, 60° Vertical, 100° Diagonal
Tilt/Swivel Adjustment: Vertical +/- 20°, horizontal +/- 30° (see Diagram A)
IR Compatibility: This camera is equipped with an OLP (Optical Low Pass) filter to maintain correct video color in outside applications
The standard camera is NOT compatible with IR illuminators
If IR illumination is required, you will need to replace the exisiting camera with a Viking model VCAM-1IR
Maximum Wire Run Length: See product manual (see manual)