Viking SR-IP SIP Audible Ringer with Visual Ring Indication and Remote Strobe Light Control
SIP compliant PoE powered Viking SR-IP audio device provides audible and visual ring indication for SIP VoIP phone systems. Once registered with a SIP server, the Viking SR-IP can ring in one of 4 programmable ring patterns and flash a bright red LED upon ring detection. The internal relay contacts will activate during ring detection providing a trigger for a Viking SL-2 Strobe Light or LPL-1 Visual Ring Indicator.
The Viking SR-IP is equipped with a high efficiency Class D power amplifier and high quality loud speaker and is typically louder than a telephone speaker. The Viking SR-IP advanced features include programmable Automatic Gain Control (AGC) technology which automatically increases ring volume to compensate for moderate background ambient noise. The AGC feature is ideal for variable noise environments (offices, classrooms, restaurants, etc.), and ensures that ringing is heard but not unnecessarily loud.
Viking SR-IP Features:
- Loud Ringer for noisy or variable noise environments (offices, classrooms, factories)
- Visual Ring Indicator for quiet areas (Hospitals, Church, Theater)
- Programming software included
- Bright red visual ring indicator LED
- SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
- PoE powered (class 2,
- Automatic Gain Control (AGC) to automatically increase ring volume to compensate for ambient noise
- Network downloadable firmware
- Surface mounts to a single gang or 4” x 4” electrical box or directly to a wall or post
- Remotely programmable
- Extended temperature range (-40°F to 140°F)
- Remotely adjust ringer volume
- Four programmable ring cadences: normal (2 sec ON / 4 sec OFF), double, short-short-long, short-long-short
- 2 Amp relay contacts for Viking LPL-1 or SL-2 strobe light control
- Optional LPL-1 Remote Visual Ring Indicator
- Optional SL-2 or BLK-4-EWP strobe light kit available
VoIP SIP System Compatibility List:
- On Premise
- 3COM VCX
- 3CX
- Allworx
- Aastra
- Asterisk
- Atcom
- Avaya Aura Platform
- Avaya IP Office Platform
- BlueBox
- Brekeke
- Cisco Unified Communications Manager (CUCM)*
- Cisco Unified Communications Manager Express (CUCME)
- Elastix
- epygi QX200
- Freeswitch
- Grandstream*
- Interactive Intelligence
- iPECS (Ericsson-LG)
- Iwatsu ECS
- Kamailio
- Mitel 3300
- NEC
- OfficeSIP
- OpenSIPS
- Panasonic** (with SIP Extension Card)
- PolyCom
- Samsung Communications Manager (SCM)
- ShoreTel
- Siemens Communications Server (SCS)
- SIP Express Router (SER)
- Snom PBX
- Sonus
- Switchvox
- Teksip
- Toshiba
- Vertical Wave*
- Yealink T Series S IP Phones
Cloud Based Service Provider:
- Callcentric
- iptel.org
- MetaSwitch
- Ring Central
- sip.antisip.com
- Switchvox
- unify
- Vertical Wave
- Voice Carrier
- VoIP.MS
- Wildix
- ** Note: Relay operation commands are NOT compatible with Panasonic Phone Systems (Panasonic does not transmit DTMF between station ports)
Viking SR-IP Applications:
- Audible / Visual Ringer for variable noise environments:
- Offices
- Classrooms, etc.
- Visual Ring Indicator for quiet areas:
- Hospitals
- Churches
- Theaters, etc.
Viking SR-IP Specifications:
- Power: PoE class 2 (<6.5 Watts)
- Shipping Weight: 1.5 lbs (0.75 kg)
- Dimensions: 5.5″ x 4.5″ x 1.5″ (140mm x 115mm x 38mm)
- Operating Temperature: -40°F to 140°F (-40°C to 60°C)
- Humidity: 5% to 95% non-condensing
- Maximum Sound Pressure: 93dB SPL @ 1m
- SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
- Audio Codecs: G711u, G711a, G722
- Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
- Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors
Viking SR-IP Certifications
- SIP
| Model | SR-IP |
|---|
Viking BLK-4-EWP Blue Strobe Light Kit with Steady-On Feature and Enhanced Weather Protection
Model: BLK-4-EWP
SKU: BLK-4-EWP