The K-1900-8-IP VoIP panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard manual dial phone.
26 Bit Wiegand input for adding a Viking proximity card reader
26 Bit Wiegand output can connect to card reader input of an Access Control System
Cycles to rollover phone number on busy or ring-no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Remotely programmable
Extended temperature range: -40°F to 140°F
Diagnostics (for testing relays)
Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
Flush mount using the included rough-in box or surface mount using a Viking VE-6X7 Surface Mount Box
EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards
Specifications:
Power: PoE class 2 (
Phone Dimensions: 5.0″ x 10.0″ x 4.68″ (127mm x 254mm x 119mm)
Overall Dimensions: 5.0″ x 10.0″ x 5.53″ (127mm x 254mm x 141mm)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity: 5% to 95% non-condensing
Panel Material: 0.105″ thick stainless steel
Handset Cable Length: 34″ to 37″ (86cm to 94cm)
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over