Viking Electronics is the leader in door entry equipment. The Viking E-30 entry speaker phone is designed to provide quick and reliable handsfree communication and can be connected directly to a CO line or analog PABX / KSU station. The Viking E-30 features non-volatile memory, auto dialer and intelligent call progress detection for automatic hang-up when a call is completed. Program up to 5 different auto dial numbers for ring-no-answer or busy. The Viking E-30 can also be configured to cycle through these numbers until answered. Use model E-30-EWP for outdoor installations where the unit is exposed to precipitation or condensation.
The C-200 allows single line telephones or a telephone system to share a phone line with a single Viking door entry phone. Tenants may answer an entry phone call and converse with the visitor. The C-200 provides a “Call Waiting” tone when the phone line is in use. Tenants may call out to the door entry phone for monitoring purposes. Auxiliary contacts are provided to operate a doorbell, or activate a camera, lights, etc. NOTE: Not for use with a door strike. If additional features (such as doorstrike, multiple entry phones with caller ID, and keyless entry) are needed, use the Viking model C-500 or C-2000B.
Viking electronics also offers an IP door entry phone such as the Viking E-30-IP PoE powered VoIP Door Entry Phone provides reliably quick handsfree communication for SIP VoIP phone systems with PoE The Viking E-30-IP entry phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The E-30-IP can dial up to 5 programmable numbers. The E-30-IP entry door phone will flash the “Call” LED during dialing and automatically light the LED when the call is answered. All programming, phone numbers and location numbers are stored in a non-volatile memory requiring no batteries. This unit is PoE powered.