Viking Amplified Remote Access Device

Amplified Remote Access Device- Extends the usefulness of your phone system to remote employees, as well as providing call forwarding to remote employees or locations. As a line extender, provides authorized users remote access to PABX, Centrex or Electronic Key system features. As a call diverter, provides call forwarding from one location to another. After detecting an inbound call, the RAD-AMP accesses a second phone line, dials a preprogrammed Touch Tone number, and then bridges the two lines.

Applications:

• Line Extender
• Bridge calling zones
• Utilize inexpensive WATS, FX or TIE lines
• Remotely access paging amplifiers (PA-2A, HF-3W) or service observers (SO-24A)
• Remote audio monitoring of radio or church programs and security sites
• Call Diverter
• Forward calls to voice mail or dictation equipment
• Eliminate C.O. "Call forwarding" charges
• Forward after hours calls to "on call" employees or answering services
• Telecommuting Extender
• Home based call center personnel
• Outside sales staff
• Traveling executives and personnel

Features:

• Improved audio amplifier
• Programmable 6 digit security code
• Programmable ring delay
• Remote night switch
• Disconnects on CPC, busy, return dial tone, maximum call time or by dialing #7
• Non-volatile memory (no batteries required)
• Auxiliary dry contacts
• Programmable 15 second to 49.5 minute call timer
• Compatible with analog stations on PABX and KSU systems
• Simple programmable toll restriction
• Access code(s)
• 500 ms hook switch flash command
• 2 second disconnect command
• 32 digit phone number memory
• Log-In and Log-Out capability
• Special tone notifies of work related calls
• Supports PABX/KSU features (transfers, voicemail, paging, etc.) to remote employees
• Power: 120VAC/13.8VAC 1.25A UL listed adapter provided
• Dimensions: 5.25" x 5.1" x 1.5"
• Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
• Connections: (2) RJ11 modular jacks