Viking Vandal Resistant, Hot-Line Phone with Built-in Keypad

Stainless steel hot line dialer panel phone with armored cable. Replaces leased ringdown circuits using standard loop start CO lines. The Hot-Line phone automatically dials the programmed number whenever the handset is picked up. 4-second pauses can be programmed for use on Centrex or behind PABX. Automatically dials the number and has a vandal resistant DTMF keypad which provides interaction with Voice Response equipment.

Features:

• Auto dials 1 (up to 32 digits) programmable speed dial number
• Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers
• Operates on analog PABX and key system extensions or analog Centrex and C.O. lines
• Ring detection (won’t dial on incoming calls)
• Programmable 6 digit security code
• Vandal resistant, heavy gauge, stainless steel panel; armored cable, metal cradle and metal keypad
• Hearing aid compatible amplified handset with rotary volume control
• Non-Volatile E² Memory
• Batteries Not Required
• Touch Tone or Pulse
• 0 to 20 Digits
• Fraudulent calls from hand held dialers are blocked
• Can be programmed at the shop, on site or remotely using a Touch Tone phone
• Dialer can be disabled
• Ringer for incoming calls optional (see Q170600)
• Panel size: 5" x 10" x 4"

Applications:

• Courtesy and Emergency Phones
• Cash Machines
• Customer Service
• Taxi
• Airline/Hotel/Rental Car Reservations
• Security
• Help Lines
• POS Displays

Enhanced Weather Protection Option:

Includes weather-sealed trim pots and DIP switches, a special rubber microphone boot and a mylar speaker with a rubber gasket acting as a primary shield against water penetration. If required, face plate gaskets are provided to further eliminate water infiltration. All connections are hand soldered to eliminate corrosion, and the connections at the push button switch, microphone, and "Call Connected" LED are also hand sealed using a special non-corrosive electronics grade flexible silicone sealant. The entire circuit board is "potted" in a flexible urethane encapsulating material, leaving the weather sealed field-adjustable trim pots and DIP switches accessible for on-site programming. The flexible urethane sealant allows the circuit board and its components to expand and contract, while maintaining weather resistance. To protect the tip and ring connections, special connectors filled with anti-corrosive sealing gel are included.