Viking Multi-Button Handsfree Entry Phone with Camera

Entry Phone with Camera Features:

• Built-in color CCTV video camera
• The rugged stainless steel faceplate has a printed directory housed in a waterproof, scratch-resistant lens
• Especially suitable for small apartment buildings, secure professional buildings, and any gated communities
• Call buttons are located directly beside the tenants name in the directory so there are no confusing codes
• A built in speed dialer can handle up to 12 primary phone numbers and 12 alternate numbers, each with 22 digits
• If there is no answer at the first number, a second number can be called automatically
• Once the tenant answers their phone, a single touch tone command can activate the door strike relay
• For “no phone line” applications, the K-1205 is compatible with the C-3000 no CO (phone line) controller
• The high resolution video camera is mounted on an adjustable bracket so it can be positioned to view the outside visitor - with wide viewing, tilt/swivel adjustments and wide operating temperature of -30°F to 150°F
• Operates on 12 to 24 volts AC/DC
• One button operation (no call button)
• Hang-up on CPC, busy, silence, time-out or dial tone return
• Touch tone restriction from microphone
• Integral relays for camera control and door strike
• Works with C-1000B for increased security
• VE-LIGHT compatible
• 50 keyless entry codes
• Dimensions: 5" x 10" x 2.5"
• Operating Temp: -30°F to 150°F
• Relay Contact Rating: Door Strike: 5A @ 30VDC/250VAC
• Maximum Camera: 0.5A @ 125 V AC, 1.0A @ 30 V DC
• Connections: (13) gel-filled butt connectors (3M Scotchlok UR2)

Enhanced Weather Protection Option:

Includes weather-sealed trim pots and DIP switches, a special rubber microphone boot and a mylar speaker with a rubber gasket acting as a primary shield against water penetration. If required, face plate gaskets are provided to further eliminate water infiltration. All connections are hand soldered to eliminate corrosion, and the connections at the push button switch, microphone, and "Call Connected" LED are also hand sealed using a special non-corrosive electronics grade flexible silicone sealant. The entire circuit board is "potted" in a flexible urethane encapsulating material, leaving the weather sealed field-adjustable trim pots and DIP switches accessible for on-site programming. The flexible urethane sealant allows the circuit board and its components to expand and contract, while maintaining weather resistance. To protect the tip and ring connections, special connectors filled with anti-corrosive sealing gel are included.