Viking ADA Compliant Emergency Tower Phone

Many new building codes require emergency communication in elevators and “Area of Refuge” sites. Now you can provide added safety for your patrons, employees, and students with the addition of High Visibility, ADA Compliant emergency communication.

Emergency Tower Phone Features:

• Enhanced Weather Protection (EWP)
• Meets ADA requirements for Emergency Phones:
• With the simple push of a button, initiate a call to your emergency personnel and send a digital announcement to identify the location of the emergency call
• Phone can also dial up to 3 non-emergency "Info" numbers
• Can automatically light the “Call Connected” LED for the hearing impaired
• Transmits a unique location I.D. code or voice announcement
• Grade 2 Braille label for the visually impaired
• Nonvolatile digital voice announcer with 16 seconds of voice memory
• 1 million candle power blue strobe light
• Advanced call progress detection
• Hands free operation
• Phone line powered emergency phone (strobe requires power)
• Nonvolatile memory (no batteries required)
• Touch Tone or pulse dialing
• Dials up to 5 emergency numbers
• Cycles through backup emergency and non-emergency numbers on busy or no answer
• Hangs up on CPC, silence, busy signal, dial tone, timeout or Touch Tone command
• Programmable to auto answer on incoming calls
• Remotely programmable
• Extended temperature range (15 to 130 degrees F)
• Central Station Monitoring capability (dials 2 numbers)
• Separate central station voice speed dial number
• Optional PB100 Polling System available (see page 10)
• High visibility, vandal and weather resistant
• Vandal resistant polycarbonate strobe lens
• Surface mountable

Enhanced Weather Protection Option:

Includes weather-sealed trim pots and DIP switches, a special rubber microphone boot and a mylar speaker with a rubber gasket acting as a primary shield against water penetration. If required, face plate gaskets are provided to further eliminate water infiltration. All connections are hand soldered to eliminate corrosion, and the connections at the push button switch, microphone, and "Call Connected" LED are also hand sealed using a special non-corrosive electronics grade flexible silicone sealant. The entire circuit board is "potted" in a flexible urethane encapsulating material, leaving the weather sealed field-adjustable trim pots and DIP switches accessible for on-site programming. The flexible urethane sealant allows the circuit board and its components to expand and contract, while maintaining weather resistance. To protect the tip and ring connections, special connectors filled with anti-corrosive sealing gel are included.